JL Audio XD400/4V2 4 channel amplifier
€649.00
JL Audio XD400/4V2
- Condition: New
- Sale type: BTW/21%
- Stock : 2 -4 days extra delivery time
Productinfo
- 4-channel full-range amplifier Class D, 100 W x 4 @ 2 Ω / 75 W x 4 @ 4 Ω - 14.4V
- The breakthrough that makes so much power possible in such a small package is JL's NexD™ ultra-high-speed switching design, which enables Class D operation across the entire bandwidth with extremely low distortion and outstanding efficiency.
- Use the XD400/4v2 in combination with JL's XD600/1 monoblock to build a 1000W amplifier system driving four satellites and a subwoofer.
- Or use the XD400/4v2 alone to drive two satellites and a subwoofer.
- The XD400/4v2 includes a 12 dB/octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers a continuously variable cut-off frequency selection of 50-500 Hz.
- The XD400/4v2 also features the v2 Spec feature set, which consists of an auto power-on function (via signal sampling or DC offset sampling) and a dual-range differential balanced input section that can handle a wide range of input voltage levels.
- With an additional HD-RLC remote control (sold separately), the level of the amplifier can be controlled directly from the driver's seat.
- This amplifier has a black powder coating and a sealed, brushed aluminum cover for the controls.
Rated continuous power (RMS) at 14.4 V
- @ 4 Ω : 75 W RMS x 4
- @ 2 Ω : 100 W RMS x 4
- Bridged @ 4Ω : 200 W RMS x 2
Rated continuous power (RMS) at 12.5 V
- @ 4 Ω : 60 W RMS x 4
- @ 2 Ω : 90 W RMS x 4
- Bridged @ 4Ω : 180 W RMS x 2
General specifications
- Frequency response : 12 Hz - 22 kHz (+0, -1dB)
- S/N ratio, relative to the highest rated power: >104 dB below the rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Attenuation factor @ 4 Ω : >150 / 50 Hz
- Attenuation factor @ 2 Ω : >75 / 50 Hz
- THD+N @ Nennleistung : <1% @ 2 Ω pro Ch.
- Input voltage range @ RCA inputs : switchable from 200 mV - 2 V RMS (low) to 800 mV - 8 V RMS (high)
- Minimum cable diameter : 25mm²
- Fuse rating : 40 A (AFS, AGU or MaxiFuse™)
Signal processing
- Filter mode : Low-pass or high-pass
- Filter slope : 12 dB/octave
- Filter frequency range : 50 Hz - 500 Hz
- Calibrated filter freq. potentiometer : Yes
- Filter defeat function : Yes
- Remote control : Optional (HD-RLC)
- Channel input mode switch : Yes (2/4 channel)
- Pass-through preamplifier output : buffered
- Selection of the source channel for PreOuts : Yes
Dimensions
- Height (H): 52 mm (2.05 inches)
- Width (W): 216 mm (8.52 inches)
- Depth (D) : 180 mm (7.09 inches)
- Do you have questions ? use the whatsapp chatbox for your audio advice or send e-mail (Contact info page)
- Info page > Shipping / Payment / Warranty<